Interflow plays a central role in delivering ambitious master plan

The DOYMA range of products available from Interflow are providing a modern solution to an ambitious multi-million pound project to transform one of London’s most important and historic districts.

London Wall Place is a 500,000 sq ft scheme designed by MAKE, delivering two landmark office buildings and extensive, landscaped public realm. The regeneration of this section of London Wall will bring renewed vibrancy to one of London’s most important districts.

Interflow is the UK distributor and installer of a specialist range of products for the built environment.

DOYMA pipe sealing systems prevent structural damage. Wherever service ducts are installed through walls, ceilings or floors, penetrating water, other liquids or humidity may cause damage to buildings, DOYMA duct sealing systems ensure professional and perfect sealing, thus presenting excellent preventative measures against structural damage.

For the London Wall scheme, Interflow has provided the DOYMA Curaflex pipe sleeve 6000.

The inside face of the sleeve provides an optimum contact surface for the elastomer of the Curaflex gasket insert, making it the perfect option for the project. Other key benefits include it is a steel pipe sleeve for high static loads with integrated fixed and loose flanges which can be installed flush within the shuttering.

It is also gas-tight and, depending on the tanking membranes, can be supplied with elastomer packings, Curaflex 1775, to securely clamp thin and hard membranes; other accessories for thick and sprayed-on membrane systems are also available. The DOYMA Curaflex pipe sleeve 3000 was also specified, which forms a watertight bond with the concrete because the coefficient of expansion of the material corresponds to that of concrete and is ideal for buildings without tanking membranes. The DOYMA Curaflex pipe sleeve 3001 is a dimensionally stable and resistant special fibre material on which the inside face provides an optimum contact surface for he elastomer of the Curaflex gasket insert.

The two buildings comprising London Wall Place have been designed to enable half of the site to be dedicated to open space, creating a new destination for the area through a series of new gardens set amongst the historic monuments including the Roman City Wall and St Alphage Church Tower remains.

2 London Wall Place is a 16 storey tower providing floors of 12,000 sq ft. The building has elegant architecture, enhanced by vertical glazing strips and a spectacular triple height space at the top of the building.

1 London Wall Place is 300,000 sq ft headquarters building. Arranged over 12 storeys, its innovative design concept provides floor plate sizes of approximately 9,000 sq ft to 42,000 sq ft. Its landscaped sky gardens breathe new life into City working. The building has been fully let to Schroders Plc.

The scheme is assessed ‘Excellent’ with occupier co-operation under BREEAM 2014; it represents a minimum of 25% improvement over 2010 Part L Building Regulation requirements. The project has also been designed for the latest environmentally efficient heating, cooling and ventilation systems as well as lighting.

Interflow specialises in providing products and solutions designed to enhance, add value and increase sustainability across commercial and public sectors, thereby helping customers save energy and reduce their carbon footprint.