Mainsboost Summer Prize draw with Stuart Turner

You could WIN a £1,000 Holiday!

Register your Mainsboost products online, and be in with the chance of winning. This promotion will be running from August through to October.

All you have to do to enter the competition, is register your Mainsboost products online at www.Stuart-Turner.co.uk/installer-club. Not only will you be entering the draw, you can start earning points with our Installer Club to claim back off merchandise or products. By registering with Installer Club, you are able to easily register any Stuart Turner products you install by entering the serial number onto the website.

Our Mainsboost vessels come with 3 years warranty and chargers 5 years warranty, are fully WRAS approved, engineered with robust brass construction, and are continuously rated.

Looking to fit a Mainsboost product? When specifying a Mainsboost system, it is very important to check the incoming pressure and flow rate. This can be carried out by using our Stuart Turner pressure and flow testing kit.

The test kit has been designed to connect to outside taps or 15mm and 22mm pipework.

Connect to outside tap, close isolation valve, ope­­n outside tap – this will record your standing (static) pressure, open isolation valve to run the water, this will record your flow rate through the flow meter and will also record your dynamic pressure.

By carrying out this exercise, it will determine whether or not you need a pump for your Mainsboost system.

On the Stuart Turner website, you are able to complete a Mainsboost survey, Completing the information below will help us to ensure the correct product is specified for the right application. You can complete this survey at Stuart Turner | Water Pressure and Flow Boosting Site Survey Form (stuart-turner.co.uk).

If your standing (static) pressure is below 2 bar, we would recommend using a Mainsboost charger pump. However, if you have 2 bar or more then no pump is required.